The Rotothinner™ offers a two in one instrument for material testing. It offers easy continuous monitoring of the material viscosity during the addition of solvents and thinners to create supply or RFU viscosity. However uniquely the instrument also allows definitive viscosity analysis at times preselected by the user, providing excellent data relating to shear performance, perfect for laboratory and factory applications.

The flexibility of the Rotothinner™ allows the user the ultimate control during the viscosity reduction process whilst also providing very useful stability analysis. It is therefore perfectly suitable for use in both production and laboratory environments.

Three measuring ranges in one instrument The Rotothinner™ can be supplied with a choice of spindles*. In total three spindles are available: one plate and two ball spindles. With these spindles three measuring ranges are covered.

►The plate spindle is used to determine viscosity of fluids of 0-22 poise.

►The large ball spindle can be used for measurements between 0-75 poise.

►The small ball spindle is made for measurements between 0-350 poise.

Conforming to ISO 2884 and BS 3900 A7 besides the spindles a range of verification oil kits are available.

*If you need spindles of the old model Sheen Rotothinner™, please contact us for availability and the correct article numbers.

Operation The supplied tin container is filled with sample fluid and positioned on a magnetic ring mounted on top of the base. The spindle is submersed in the sample fluid by lowering the handle. When the handle has reached the lowest point, the spindle starts rotating with a set constant speed. The displays shows the actual measured viscosity in poise.

Readings The reading of free flowing fluids will quickly be steady. More Structured materials will need more time because the spindle applies shear that influences the reading. That’s why the Rotothinner™ offers several reading presets. The manual reading starts when the handle is at its lowest point. The continuous reading gives continuous measurement results. The max hold function shows the maximum reading, whereas the time-to-reading function offers the opportunity to automatically take readings with a set time interval. An automatic display hold function is available to freeze the reading so it can be noted more easily.

Easy-to-clean After taking the reading(s) the handle can be lifted to a level where the spindle is just below the rim of the sample container. This level offers the operator the opportunity to spin off the sample material. When the handle is raised to its maximum extent the spindle automatically switches off. The quick release chuck allows for quick spindle exchange and eases cleaning the instrument and spindles.

Accurate and repeatable The Rotothinner™ is microprocessor controlled which ensures a higher accuracy and repeatability. The accuracy is enhanced by the automatic multi-point calibration, for which no dongle is required.

After taking the reading(s) the handle can be lifted to a level where the spindle is just below the rim of the sample container. This level offers the operator the opportunity to spin off the sample material. When the handle is raised to its maximum extent the spindle automatically switches off. The quick release chuck allows for quick spindle exchange and eases cleaning the instrument and spindles.

DIMENSIONS 200x360x550 mm / 7.9×14.2×21.7 inch REPEATABILITY +/- 1% ACCURACY +/- 1% of full scale RESOLUTION 0.1 P / 1 cP MASS 8.5 kg / 18.74 lbs OPERATING TEMPERATURE 15-35ºC / 59-95ºF POWER 100 – 240VAC / 50 – 60Hz RANGE Spindle: 0-22 P | Spindle 2: 0.1-75 P | Spindle 3: 1-350 P SUPPLY Spindle delivered separately SAMPLE RL seal required for spindle 1 SPEED 562 rpm