Thermo Scientific Eutech COND 6+

  • Product Code: Thermo Scientific Eutech COND 6+

Multi-Point Push-button Calibration (up to 5 points) with ±1% full scale accuracy :: Option of quick, easy automatic calibration or customised, near-to-sample manual calibration. :: Auto-Ranging for Conductivity/TDS measurements for fast response and best resolution over wide measurement range :: Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating..

Tags: Thermo Scientific Eutech COND 6+

Range (Based on 1.0 Cell Constant) 0.00 - 19.99 µS/cm 20.00 - 199.9 µS/cm 200.0 - 1999 µS/cm 2.00 - 19.99 mS/cm 20.0 - 200.0 mS/cm Resolution 0.05 % full scale Accuracy ±1 % of full scale ±1 LSD Temperature Range 0.0 to 100.0 ºC / 32.0 to 212 ºF (80.0 ºC with supplied probe) Resolution 0.1 ºC / 0.1 ºF Accuracy ±0.5 ºC / ±0.9 ºF Compensation ATC / MTC (0 to 80 ºC) Normalization 20.0 or 25.0 ºC Operating Temperature 5 to 45 ºC Meter Features Calibration Points 4 (1 per range) auto, 5 (1 per range) manual Temperature Coefficient 0.0 - 10.0 % Cell Constant 0.1, 1.0, 10.0 Auto-Off 20 min after last key pressed Input BNC, 2.5 mm phono socket Power/Battery Life 4 x 1.5 V ‘AAA’ alkaline batteries (included); > 500 hours Dimensions/Weight Meter (LxWxH) 15.7 x 8.5 x 4.2 cm; 255 g Boxed (LxWxH) 36 x 28 x 8 cm; 1555 g
ECCON603PLUSK COND 6+ with CONSEN91B electrode, KCl calibration solutions (84 μS/cm, 1413 μS/cm, 12.88 mS/cm), and DI rinse water (60 mL each), Grip-Clip, and batteries in hard carrying case ECCON603PLUS COND 6+ with CONSEN91B electrode, Grip-Clip, batteries CONSEN91B Replacement electrode with ATC, k=1.0 CONSEN72B Epoxy electrode with ATC, k=0.1 GRIPCLIP Grip-Clip electrode holder
Multi-Point Push-button Calibration (up to 5 points) with ±1% full scale accuracy :: Option of quick, easy automatic calibration or customised, near-to-sample manual calibration. :: Auto-Ranging for Conductivity/TDS measurements for fast response and best resolution over wide measurement range :: Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating temperatures :: Hold Function momentarily freezes reading for easy viewing :: Auto-Power Off saves battery power after non-use :: Self-Diagnostic with message codes for easy troubleshooting :: Large Custom LCD provides optimum viewing even at a distance :: Electrode with Built-in ATC designed for minimal air bubble entrapment during measurement :: Protective Rubber Boot shields meter from drops and features a sturdy built-in stand for easy bench-top operation :: Meter Kit (Optional) - contains everything you need for calibration and measurement in a rugged carrying case
Special Ofers For Subscribers

Ten Percent Member Discount