TDS
Range
(Maximum 199.9 ppt Depending on
TDS Factor Setting)
0.00 - 9.99 ppm
10.0 - 99.9 ppm
100 - 999 ppm
1.00 - 9.99 ppt
10.0 - 99.9 ppt
Resolution 0.05 % full scale
Accuracy ±1 % of full scale ±1 LSD
TDS Factor 0.30 to 1.00
Temperature
Range 0.0 to 100.0 ºC / 32.0 to 212 ºF
(80.0 ºC with supplied probe)
Resolution 0.1 ºC / 0.1 ºF
Accuracy ±0.5 ºC / ±0.9 ºF
Compensation ATC / MTC (0 to 80 ºC)
Normalization 20.0 or 25.0 ºC
Operating Temperature 5 to 45 ºC
Meter Features
Calibration Points 4 (1 per range) auto, 5 (1 per range) manual
Temperature Coefficient 0.0 - 10.0 %
Cell Constant 0.1, 1.0, 10.0
Auto-Off 20 min after last key pressed
Input BNC, 2.5 mm phono socket
Power/Battery Life 4 x 1.5 V ‘AAA’ alkaline batteries (included);
> 500 hours
Dimensions/Weight
Meter (LxWxH) 15.7 x 8.5 x 4.2 cm; 255 g
Boxed (LxWxH) 36 x 28 x 8 cm; 1555 g
ECTDS603PLUSK TDS 6+ with CONSEN91B electrode, 442 calibration solutions (50 ppm, 300 ppm, 3000 ppm), and DI rinse water (60 mL each), Grip-Clip, and batteries in hard carrying case
ECTDS603PLUS TDS 6+ with CONSEN91B electrode, Grip-Clip, batteries
CONSEN91B Replacement electrode with ATC, k=1.0
CONSEN72B Epoxy electrode with ATC, k=0.1
GRIPCLIP Grip-Clip electrode holder
Multi-Point Push-button Calibration (up to 5 points) with ±1% full scale accuracy
:: Automatic or Manual Calibration - for quick, easy calibration; use automatic mode with preset calibration points at most popular values or manually set values in the manual mode for more flexibility
:: Auto-Ranging for Conductivity/TDS measurements for fast response and best resolution over wide measurement range
:: Adjustable TDS Factor for more accurate measurement (for TDS 6 model only)
:: Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating temperatures
:: Hold Function momentarily freezes reading for easy viewing
:: Auto-Power Off saves battery power after non-use
:: Self-Diagnostic with message codes for easy troubleshooting
:: Large Custom LCD provides optimum viewing even at a distance
:: Electrode with Built-in ATC designed for minimal air bubble entrapment during measurement
:: Protective Rubber Boot shields meter from drops and features a sturdy built-in stand for easy bench-top operation
:: Meter Kit (Optional) - contains everything you need for calibration and measurement in a rugged carrying case
